Uni-Solar PVL-136, 136W Solar Laminate

Average Rating: 0

  • Uni-Solar PVL-136, 136 Watt 24 volt nominal Laminate

    The innovative UNI-SOLAR product line includes building integrated photovoltaic (BIPV) a lightweight, flexible solar electric system designed to serve a dual purpose of roofing and power generation. It is also an ideal solution for new construction or re-roof situations.

    • Architecturally pleasing systems that do not distract from the natural lines of the home
    • Complete design freedom with ridge to eave coverage possible
    • Solar panels are structurally and aesthetically integrated roofing elements
    • Cost effective installation through easy and fast fixing of large area roofing elements using standard installation techniques
    • No back-ventilation of solar panels necessary (lightweight laminates are easy to handle and can be field applied directly on metal)
    • No support structures needed
    • UL Listed as prepared roofing cover
    • Modules and inverter UL Listed
    • Integrated with flat 16” wide (minimum) metal roofing systems
    • Wind and water-tight roof
    • Suitable both for renovation and for new construction
    • 20-year power output and 5-year system warranty
    • Standard junction box or weather-tight quick connect system
    • “Peel & stick” adhesive backing capable of withstanding 160 mph wind loads

    Solar Laminate PVL-Series
    Model: PVL-136

    High Temperature and Low Light Performance
    20 Year Warranty on Power Output at 80%
    Quick-Connect Terminal
    Bypass Diodes for Shadow Tolerance
    UL Listed to 600 VDC
    Meets IEC 61646 Requirements

    Rated Power (Pmax): 136 watts
    Production Tolerance: ±5%

    Dimensions: LxWxD 216" x 15.5" x 0.2" (5486x 394 x 4 mm), 0.6" (16 mm) including potted terminal housing assembly.
    Weight: 17.0 lbs. (7.7 kg)
    Output Cables: ~2.5 mm2 cable with weatherproof DC rated with quick-connect terminals 22" (560 mm) length
    By-pass Diodes: Connected across every solar cell.
    Laminate Encapsulation: Durable ETFE (e.g. Tefzel®) high light-transmissive polymer.
    Adhesive: Ethylene propylene copolymer adhesive-sealant with microbial inhibitor.
    Cell Type: 22 triple junction amorphous silicon solar cells 14" x 9.4" (356 x 239 mm) connected in series.

    Listed by Underwriter's Laboratories for electrical and fire safety (Class A Max. Slope 2/12, Class B Max. Slope 3/12, and Class C Unlimited Slope fire ratings) for use in systems up to 600 VDC.

    Photovoltaic laminate with potted terminal housing assembly with output cables and quick-connect terminals, e.g. Multi-contact (MC3) connectors

    Photovoltaic laminate with junction box.

    • New or qualified new roof installation
    • 16" minimum steel pan width
    • PVDF Coated (Galvalume® or Zincalume®) steel metal pan
    • Steel pans with flat surface (without pencil beads or decorative stippling)
    • Installation be certified installers only
    • Installation temperature between 10°C to 40°C (50°F to 100°F)
    • Maximum roof temperature 85°C (185°F)
    • Minimum slope 1:12 (5°)
    • Maximum slope 21:12 (60°)
    • Refer to manufacturers installation guide for approved substrates & installation methods
    Maximum Power (Pmax): 136 w
    Voltage at Pmax (Vmp): 33.0 V
    Current at Pmax (Imp): 4.1 A
    Short-Circuit Current (Isc): 5.1 A
    Open-circuit Voltage (Voc): 46.2 V
    Maximum Series Fuse Rating: 8 A

    Maximum Power (Pmax): 105 w
    Voltage at Pmax (Vmp): 30.8 V
    Current at Pmax (Imp): 3.42 A
    Short-Circuit Current (Isc): 4.1 A
    Open-circuit Voltage (Voc): 42.2 V
    NOCT 46°C

    Temperature Coefficient of Isc: 5.1 mA/°K (0.10%/°C)
    Temperature Coefficient of Voc: -176 mV°/K (-0.38%/°C)
    Temperature Coefficient of Pmax: -286 w/°K (-0.21 %/°C)
    Temperature Coefficient of Imp: 4.1 mA/°K (0.10%/°C)
    Temperature Coefficient of Vmp: -102 mV/°K (-0.31%/°C)

    1 1000 w/m2, AM 1.5, 25°C, Cell Temperature
    2 800 w/m2, AM 1.5, 1 m/s wind
    3 AM 1.5, 1000w/m2 irradiance

    1 During the first 8 to 10 weeks of operation, electrical output exceeds specified ratings. Power output may be higher by 15%, operation voltage may be higher by 11% and operating current may be higher by 4%
    2 Electrical specifications are based on measurements performed at standard test conditions of 1000 W/m2 irradiance, Air Max 1.5 and Cell Temperature of 25C after stabilization
    3Actual performance may vary up to 10% from rated power due to low temperature operation, spectral and other related effects. Maximum system open-circuit voltage not to exceed 6000 VDC per UL.
    4 Specifications subject to change without notice
  • No information available
  • Length: 216"
    Width: 15.5"
    Height: 0.1"
    Weight: 17 lbs