Uni-Solar PVL-144, 144W Solar Laminate

Average Rating: 0

  • Uni-Solar PVL-144, 144 Watt 24 volt nominal Laminate

    Solar Laminate PVL-Series
    MODEL: PVL-144

    • High Temperature and Low Light Performance
    • 20 Year Warranty on Power Output at 80%
    • Quick-Connect terminals* and Adhesive Backing
    • Bypass Diodes for Shadow Tolerance
    • UL 1703 Listed to 600 VDC
    • IEC 61646 v1 certified
    • IEC 61646 v2 and 61730, TUV certification pending
    Performance Characteristics
    Rated Power (Pmax): 144 watts
    Production Pmax Tolerance: ±5%

    Construction Characteristics
    Dimensions: 216" x 15.5" x 0.2" (5486 x 394 x 4 mm), 0.6" (16 mm) including potted terminal housing assembly
    Weight: 17.0 lbs (7.7 kg)
    Output Cables: 12 AWG (4 mm2) cable with weather proof DC rated quick-connect terminals*. 22" (560 mm)
    By-pass Diodes: Connect across every solar cell
    Encapsulation: Durable ETFE high ligh-transmissive polymer
    Adhesive: Ethylene propylene copolymer adhesive-sealant with microbial inhibitor
    Cell Type: 22 triple junction amorphous silicon solar cells 14" x 9.4" (356 x 239 mm) connected in series

    Qualification and Safety
    Listed by Underwriter's Laboratories for electrical and fire safety (Class A Max. Slope 2/12, Class B Max. Slope 3/12, Class C Unlimited Slope fire ratings) for use in system up to 600 VDC.

    Laminate Standard Configuration
    Photovoltaic laminate with potted terminal housing assembly with output cables and quick-connect terminals.*

    Application Criterion
    • New or qualified new roof installations
    • Installation by certified installers only
    • Installation temperature between 10°C to 40°C (50°F to 100°F)
    • Maximum Roof temperature 85°C (185°F)
    • Minimum slope: 5/8:12 (3°)
    • Maximum slope: 21:12 (60°)
    • Membrane: Select EPDM and TPO substrates from approved manufacturers only
    • Metal: PVDF Coated (Galvalume or Zincalume) steel metal roofing pan with flat surface (without pencil beads or decorative stippling) and 16" (406 mm) minimum width
    Refer to manufacturer's installation guide for approved substrates and installation methods

    * e.g. Multi-Conntact (MC) Connectors

    • Flexible
    • Light weight
    • No-Glass
    • Durable
    • Shadow Tolerant
    • High Temperature Performance
    Electrical Specifications at Standard Test Conditions (STC)
    Maximum Power (Pmax) 144 watts
    Voltage at Pmax (Vmp): 33.0 volts
    Current at Pmax (Impp): 4.36 amps
    Short-Circuit Current (Isc): 5.3 amps
    Open-Circuit Voltage (Voc): 46.2 volts
    Maximum Series Fuse Rating: 8 amps

    Temperature Coefficients at STC
    Temperature Coefficient (TC) of Isc: 0.001/°K (0.10%/°C)
    Temperature Coefficient (TC) of Voc: -0.0038/°K (-0.38%/°C)
    Temperature Coefficient (TC) of Pmax: -0.0021/°K (-0.21 /°C)
    Temperature Coefficient (TC) of Imp: 0.001/°K (0.10%/°C)
    Temperature Coefficient (TC) of Vmp: -0.0031/°K (-0.31%/°C)
    y = reference * [1 + TC * (T-Treference)]

    1. During the first 8 to 10 weeks of operation, electrical output exceeds specified ratings. Power output may be higher by 15%, operation voltage may be higher by 11% and operation current may be higher by 4%.
    2. Electrical specifications based are based on measurements performed at Standard Test Conditions (STC) of 1000 W/m2 3. Actual performace may vary up to 10% from rated power due to low temperature operation, spectral and other related effects. Maximum system open-circuit voltage not to exceed 600 VDC per UL
    4. Specifications subject to change without notice.
  • No information available
  • Length: 216.00"
    Width: 15.50"
    Height: 0.20"
    Weight: 17 lbs