Kyocera KC85TS, 85W Solar Panel

Average Rating: 0


  • Kyocera KC85TS, 85 Watt 12 Volt PV Solar Module

    Just recently, Kyocera became the first solar panel in the world to pass TUV Rheinland’s (A 3rd party testing agency) Long Term Sequential test of solar PV module output.   This test involves using the same solar panel in four sub-tests: Damp Heat, Thermal Cycling, Humidit Freeze, and Bypass Diode.  Most testing agencies will use a different module for each of the four environmental tests, but TUV Rheinland’s is the first to test the module so harshly, better simulating real-world conditions.  Kyocera is still the only solar panel to have passed this test.

     

    http://www.businesswire.com/news/home/20110124005565/en/KYOCERA-Solar-Modules-Certified-TUV-Rheinland-Passing



    Highlights of Kyocera Photovoltaic Modules
    • Kyocera's advanced cell processing technology and automated production facilities produce a highly efficient multicrystal photovoltaic module.
    • The conversion efficiency of the Kyocera solar cell is over 16%.
    • These cells are encapsulated between a tempered glass cover and a pottant with back sheet to provide efficient protection from the severest environmental conditions.
    • The entire laminate is installed in an anodized aluminum frame to provide structural strength and ease of installation.
    Applications
    • Microwave/Radio repeater stations
    • Electrification of villages in remote areas
    • Medical facilities in rural areas
    • Power sources for summer vacation homes
    • Emergency Communication systems
    • Water quality and environmental data monitoring systems
    • Navigation lighthouses
    • Pumping systems for irrigation, rural water supplies and livestock watering
    • Aviation obstruction lights
    • Cathodic protection systems
    • Desalination systems
    • Railroad signals
    • etc.
    Qualifications
    • MODULE : UL1703 certified
    • Hazardous Locations Class1, Div 2, Groups A, B, C and D
    • FACTORY : ISO9001 and ISO 14001
    Quality Assurance
    Kyocera multicrystal photovoltaic modules have passed the following tests:
    • Thermal cycling test
    • Thermal shock test
    • Thermal / Freezing and high humidity cycling test
    • Electrical isolation test
    • Hail impact test
    • Mechanical, wind and twist loading test
    • Salt mist test
    • Light and water-exposure test
    • Field exposure test
    Limited Warranty
    1 year limited warranty on material and workmanship
    20 years limited warranty on power output (For detail, please refer to "category IV" in Warranty issued by Kyocera)


    Specifications

    Electrical Performance under Standard Test Conditions (*STC)
    Maximum Power (Pmax): 87 Watts (+10%/-5%)
    Maximum Power Voltage (Vmpp): 17.4 Volts
    Maximum Power Current (Impp): 5.02 Amps
    Open Circuit Voltage (Voc): 21.7 Volts
    Short Circuit Current (Isc): 5.34 Amps
    Max System Voltage: 600 Volts
    Temperature Coefficient of Voc: -8.21x10-2 V/°C
    Temperature Coefficient of Isc: 2.12x10-3 A/°C
    *STC : Irradiance 1000W/m2, AM1.5 spectrum, module temperture 25°C

    Electrical Performance at 800W/m2, NOCT, AM1.5
    Maximum Power (Pmax): 62 Watts
    Maximum Power Voltage (Vmpp): 15.3 Volts
    Maximum Power Current (Impp): 4.06 Amps
    Open Circuit Voltage (Voc): 19.7 Volts
    Short Circuit Current (Isc): 4.31 Amps
    NOCT (Nominal Operating Cell Temperature) : 47°C

    Cells
    Number per Module: 72

    Module Characteristics
    Dimensions (LxWxD): 39.6" x 25.7" x 1.4" (1007 x 652 x 36 mm)
    Weight: 18.3 lbs. (8.3 kg)

    Junction Box Characteristics
    Dimensions (LxWxD): 6.7" x 7.5" x 2.0" (170.6 x 191.6 x 51.5 mm)
    IP Code: IP65

    Reduction of Efficiency under Low Irradiance
    Reduction: 6.1%
    Reduction of efficiency from an irrandiance of 1000W/m2 to 200W/m2 (module temperature 25°C)
  • No information available
  • Length: 39.6"
    Width: 25.7"
    Height: 2.3"
    Weight: 18.3 lbs